Diamond blade for Dekton Manufacturers china introduces the characteristics of the diamond

Diamond blade for Dekton Manufacturers china tells you that the diamond blade is the working body of the diamond saw blade. Diamond blade for Dekton Manufacturers china tells you that the head of the diamond saw blade is composed of diamond and matrix binder.

Diamond blade for Dekton Manufacturers china tells you that diamond is a superhard material that acts as a cutting edge. The matrix binder acts as a fixed diamond. It is composed of metal elemental powder or metal alloy powder. Different compositions are called formulas. According to different uses, the formula is different from the diamond.
Diamond blade for Dekton Manufacturers china tells you that the performance of the saw blade does not only depend on the diamond, but depends on the overall performance of the composite material, which is a composite material composed of diamond and binder. For soft stone materials such as marble, the mechanical properties of the cutter head are required to be relatively low, and copper-based binders can be used.
Diamond blade for Dekton Manufacturers china tells you that copper-based binder has low sintering temperature, low strength and hardness, high toughness, and low bond strength with diamond. When tungsten carbide (WC) is added, WC or W2C is used as the skeleton metal, with an appropriate amount of cobalt to improve the strength, hardness, and bonding characteristics, and a small amount of Cu, Sn, Zn, and other metals with low melting point and low hardness is added for bonding Mutually. The particle size of the main ingredients should be finer than 200 mesh, and the particle size of the added ingredients should be finer than 300 mesh.
Through the above introduction and analysis of the Diamond blade for Dekton Manufacturers china introduces the characteristics of the diamond, hope it helps you.