Diamond blade for Dekton suppliers china introduces Diamond blade technology selection

1. Selection of diamond particle size. Diamond blade for Dekton suppliers china tells you that when the diamond grain size is coarse and single grain size, the saw blade is sharp and the sawing efficiency is high, but the bending strength of diamond agglomeration decreases; Diamond blade for Dekton suppliers china tells you that when the diamond grain size With a mix of fine or coarse grains, the saw blades are more durable but less efficient. Taking the above factors into consideration, it is more appropriate to choose a diamond particle size of 50/60 mesh.

2. Selection of diamond distribution concentration. Diamond blade for Dekton suppliers china tells you that within a certain range, when the diamond concentration changes from low to high, the sharpness and cutting efficiency of the saw blade will gradually decrease, while the service life will gradually prolong; but if the concentration is too high, the saw blade will blunt. And the use of low concentration, and coarse particle size, the efficiency will be improved.
Diamond blade for Dekton suppliers china tells you to take advantage of the different functions of each part of the cutter head during sawing, and use different concentrations (that is, the middle layer can use a lower concentration in a three-layer or more layer structure), and the cutter head during the sawing process The middle groove is formed on the work, which is beneficial to prevent the saw blade from deflecting, thereby improving the quality of stone processing.
3. The choice of diamond strength. Diamond blade for Dekton suppliers china tells you that the strength of the diamond is an important indicator to ensure cutting performance. If the strength is too high, the crystal will not be easily broken, the abrasive grains will be polished during use, and the sharpness will decrease, resulting in the deterioration of the tool's performance; if the diamond strength is not enough, it will be easily broken after being impacted, and it is difficult to bear the heavy responsibility of cutting. Therefore, the strength should be selected at 130-140N.
Through the above introduction and analysis of the Diamond blade for Dekton suppliers china introduces the Diamond blade technology selection, hope it helps you.