For Ceramics and Stone Industry
QUANZHOU HISEN DIAMOND TOOL
Contact us
About Hisen
Copyright © 2018 Quanzhou Hisen Diamond Tool Co.,Ltd. All Rights Reserve 闽ICP备19018962号-1 Power by：300.cn
Category
Laser Welding Segments diamond core drill bits for concrete
These diamond core drill bits are mainly used for wet cutting of reinforced concrete, concrete, masonry walls. Laser welding not only gives the bit the ability to cut through reinforced concrete, but it also prevents segment loss. Crown segments are used on bits less than 2" diameter. Bits 2" diameter and above are segmented and laser welded.
To extend the life of the core drill bits, it is recommended that water is needed while drilling.
Features: Roof-shaped segments for optimum hole-starting behavior
Thread: 1 1/4-7 UNC female thread
Welded: Leaser welding
Type: Wet Drilling
Segment type: flat segments, roof segments, turbo segments
Other length and thread can be produced as required.
|
Item No. |
Diameter mm |
Segment Diamension Width*height mm |
Valid Length mm |
|
CBC51 |
51 |
3.5 *10 |
400/450/500 |
|
CBC57 |
57 |
3.5 *10 |
400/450/500 |
|
CBC62 |
62 |
3.5 *10 |
400/450/500 |
|
CBC70 |
70 |
3.5 *10 |
400/450/500 |
|
CBC76 |
76 |
3.5 *10 |
400/450/500 |
|
CBC82 |
82 |
3.5 *10 |
400/450/500 |
|
CBC89 |
89 |
3.5 *10 |
400/450/500 |
|
CBC102 |
102 |
3.5 *10 |
400/450/500 |
|
CBC108 |
108 |
3.5 *10 |
400/450/500 |
|
CBC112 |
112 |
3.5 *10 |
400/450/500 |
|
CBC122 |
122 |
3.5 *10 |
400/450/500 |
|
CBC127 |
127 |
3.5 *10 |
400/450/500 |
|
CBC132 |
132 |
3.5 *10 |
400/450/500 |
|
CBC140 |
140 |
4.0 *10 |
400/450/500 |
|
CBC152 |
152 |
4.0 *10 |
400/450/500 |
|
CBC162 |
162 |
4.0 *10 |
400/450/500 |
|
CBC178 |
178 |
4.0 *10 |
400/450/500 |
|
CBC182 |
182 |
4.0 *10 |
400/450/500 |
|
CBC200 |
200 |
4.0 *10 |
400/450/500 |
|
CBC225 |
225 |
4.5 *10 |
400/450/500 |
|
CBC254 |
254 |
4.5 *10 |
400/450/500 |
|
CBC300 |
300 |
5.0 *10 |
400/450/500 |
|
CBC350 |
350 |
5.0 *10 |
400/450/500 |
|
CBC400 |
400 |
5.0 *10 |
400/450/500 |
|
CBC500 |
500 |
5.5 *10 |
400/450/500 |